Making Connections; Verifying For A Usb Port - Kodak i55 User Manual

Making connections

USB connections

Verifying for a USB port

12
The Kodak i55/i65 Scanners can accommodate either a USB or SCSI
connection. Depending upon whether you are connecting USB or SCSI,
go to the one of the following sections.
After you install the Kodak Driver Software, check for the presence and
version of a USB port.
• Select USB Test.
The USB verification tool will check your operating system and
hardware capability to determine if you need to install a USB card.
• If a functioning USB 2.0 port is present, the following window will be
displayed. Click OK and proceed with the next section.
• If your PC does not have a USB 2.0 port installed, you should install a
USB 2.0 Accessory card..:
• If you get any message other than either of the messages above, see
the section entitled, "USB connection issues" in Chapter 6,
Troubleshooting.
A-61527 May 2006