Installation; Site Specifications; Installing The Scanner - Kodak i55 User Manual

Installation

Site specifications

Installing the scanner

8
Unpack the scanner carefully and check the contents. If any items are
missing or damaged, contact your authorized dealer immediately.
Place the scanner:
• in a clean area with temperature and relative humidity typical of an
office environment.
IMPORTANT: Only use the scanner and power supply indoors in a dry
location.
• in a location out of sunlight. Direct exposure to sun or excessive heat
may cause damage to the unit and will affect image quality.
• on a stable, level work surface capable of supporting 7.5 kg
(16.5 lbs.). Tilted or uneven surfaces may cause mechanical or
paper-feeding problems.
• within 1.52 meters (5 feet) of an easily accessible electrical power
outlet.
Keep the scanner box and packing materials for shipping purposes.
Install the scanner in the following order:
1. Install the Kodak Driver Software.
2. Verify that you have either a USB or SCSI connection and connect
the cables between your scanner and the PC.
3. Connect the power cord to the scanner.
4. Set up the input and output trays.
5. Unlock the scanner.
6. Turn on the scanner.
7. Restart the PC (required for SCSI II connection) to finalize the
Kodak Driver Software installation.
8. Install other supplied applications (optional).
IMPORTANT:
• Install the Kodak Driver Software on the host PC before you
connect the scanner.
• For best performance, use USB 2.0 when possible.
A-61527 May 2006