Rgb Waveform; Vector - RGBlink TAO 1pro User Manual

3.2.3 RGB Waveform

Click [RGB Waveform] to select position and transparency.
As shown in the picture below, users can see the component of red, green and blue through RGB Waveform. When
shooting a white object with a camera, and the wave level of red, green and blue are consistent, which means that
the white balance is set correctly. So RGB Waveform is used to detect white balance.

3.2.4 Vector

Click [Vector] to select position and transparency.
© Xiamen RGBlink Science & Technology Co., Ltd.
24
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com