Note: If there is no USB flash drive inserted, the recording icon displays gray status.
3.2 Scroll Area
The left area of the interface is the scroll area, where users can scroll clockwise/counterclockwise to achieve
functions such as Setting, Audio Meter, Brightness, RGB waveform, Vector, Histogram, and Viewfinder.
3.2.1 Setting
Click [Setting] to enter following interface.
3.2.1.1 Input Settings
Click [Input] to enter [Input Settings] page.
In this interface, you can set the Input Signal, Input Format, Audio Sampling Rate, Signal Name, Brightness,
Contrast, Saturation, Hue and Sharpness.
© Xiamen RGBlink Science & Technology Co., Ltd.
18
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com