Chapter 4 Upgrade - RGBlink TAO 1pro User Manual

Chapter 4 Upgrade

Tool: USB disk(copy the firmware to the root directory of USB disk)
Remark:
1. The U disk format supports FAT32, NTFS, exFAT and other formats. Please do not decompress
and rename the delivered package to avoid being unable to upgrade.
2. Do not power off during the upgrade process, otherwise it is easy to cause the system to be
unable to enter the system after booting.
3. If an old program (before V1.2.26), there will be a gray screen for about 1 minute when
upgrade(the program is decompressed and loaded).
4. Add firmware upgrades for HDMI input.If your version is V1.2.47_3.68_2.13and before,please no
connect any signal to the HDMI input port. After the software package upgrade is complete, the
device will automatically restart and perform firmware upgrade for HDMI input. Waiting for a
moment ,a message indicating that the upgrade is successful will pop up in the upper right corner,
then need to restart the device manually.
5. Two approaches for this upgrade guideline:
1) Website (
decompression required)
CN: https://www.rgblink.cn/productsinfo.aspx?id=157
EN: https://www.rgblink.com/productsinfo.aspx?id=204
2) Dropbox (without
decompression)
https://www.dropbox.com/sh/akcgjcqcsbn8b8q/AAAhYUsU4qVS9P7aD2-qmB46a?dl=0
© Xiamen RGBlink Science & Technology Co., Ltd.
29
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com