RGBlink TAO 1pro User Manual page 17

If you finish the above steps, then click [Stream Output] icon to enter the following interface.
1
Historial Record: You can directly find the address you have saved in the [Historical Record] . You can also delete
specific platforms by clicking [Edit]
USB: The recognized address of streaming platform stored in USB flash drive
Address/key: Show the stream URL and KEY
Confirm: Click to confirm the selected streaming platform
Then clicking [Confirm] to enter the [Stream Output Config] interface, as shown below.
Display Mode: Including Landscape Mode and Vertical Mode
Resolution/Frame Rate/Bitrate: Support settings of resolution/frame rate/bitrate
Back: Return to the previous page
Confirm: Click to confirm the previous settings
After completing the above steps, click [ON AIR] to stream ( support up to 4 live streaming platforms at the same
time).
Source Status: --Streaming; --Standby.
© Xiamen RGBlink Science & Technology Co., Ltd.
16
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com