Chapter 2 Install Your Product; Plug In Power; Connecting Input Signal - RGBlink TAO 1pro User Manual

Chapter 2 Install Your Product

2.1 Plug in Power

RGBlink TAO 1pro is packaged with a Type C power link cable and a standard power adapter. When connect the
power supply, please check the power supply standard used in your country/area.
Besides,TAO 1pro also supports power supply via batteries.(Battery options in <7.2> for your reference)

2.2 Connecting Input Signal

The camera or device with UVC compliance can be input signal to TAO 1pro by USB 3.0 interface.The camera
or device with HDMI 1.3 compliance can be input signal to TAO 1pro by HDMI interface.You can see the resolution
of the input signal on the 5.5 inch touch screen when there is active signal plug in.
Recommend:
TAO 1pro is compliance to 1080p50/60 device, once the input signal is interlace or other standard, it is no rec
ommend.
And it is recommended to connect the input sources firstly and then power on TAO 1pro after.
Once user change the input signal standard or re-connect the input signal cables, it is strongly recommended
to power off and on TAO 1pro to make sure its signal capture correctly.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
10