How To Config Tao 1Pro As A Ndi Encoder; How To Config Tao 1Pro As A Recorder - RGBlink TAO 1pro User Manual

Note: If no files can be identified in USB, the interface will show the following prompt.

3.1.5 How to Config TAO 1pro as a NDI encoder

TAO 1pro supports NDI 5.0 decoding and transmit data in H.264/H.265/RGBA/YUV442 format.In NDI network,TAO
1pro can convert video data from other channels (such as IP video streaming, HDMI, etc.) into NDI format and send
it to the receiver.
Press the NDI decoding icon to enter the interface.
NDI Channel Name: Edit the name of NDI channel
Device Name: Edit the name of device
Coding Quality: Adjust compression ratio of NDI coding
Connection: Multicast/Unicast optional
If you select Multicast, you can also set Net Mask/ IP Address/TTL. After setting, click [Save].

3.1.6 How to Config TAO 1pro as a Recorder

Plug USB hard drive to TAO 1pro USB 2.0 port and then TAO 1pro can work as a recorder. Click record icon to start
recording.
© Xiamen RGBlink Science & Technology Co., Ltd.
17
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com