Open Bill Path; Cleaning (Exterior, Bill Path) Of Mib-1 - Amrotec MIB-1 Operator's Manual

 Opening Bill Transport Path
Cautions! Do not attempt to open the rear bill path cover while device is still in operation.
Turn off the device before attempting to open the top bill path.
 Open the rear bill path cover as illustrated below, only when banknotes are jammed in this area as prompted
by the error message displayed on the LCD screen during a counting operation and device is halted.
 First, open the rear bill path cover during cleaning and maintaining of the MIB-1 device while power is Off.
 Press the Green tab (labeled as "Press") and push it down to have access to bill path.
 Once cleaning or jam removal of banknote is completed, pull it up to original location until it locked.
Make sure to close the Rear Bill path cover securely after jammed banknotes
are removed or after cleaning and maintaining task is completed.
 Cleaning Exterior Surface of MIB-1
 Cleaning the cover of MIB-1
Periodically clean the external surface of MIB-1 as follows:
 Use Alcohol contained Disinfectant wet cleaning
Wipes designed for electronic products to gently
wipe the exterior body cover of the
the surface again with a dry, soft lint-free cloth.
Wait for the surface to dry completely and
remove any fibers.
Page | 24
(Recommended Weekly)
MIB-1. Wipe