Current Time Setting; Setting Db (Denomination Batch); Stacker Capacity - Amrotec MIB-1 Operator's Manual

 Current Time Setting:
Enter . Current Time Setting to see current date
and time and make changes as to date and time zone
operator is located. Password is not required. Once
operator entered this menu item, operator can
change factory's default date and time set for US
and Eastern time zone to any other zone of their
need.
Use
change your desire year (Y), Month (M), and Day (D) whileas operator can also change the
time as to current time by folliwing hour (H), Minute( M) and Seconds (S). Once process is
completed, press
 Setting DB (Denomination Batch)
MIB-1 device allows operator to set specific batch
number for each banknote denomination from default
setting of 100 qty for every denomination and apply
only to SINGLE and SORT counting mode.
 Press
menu item  select denomination you want to change
using ◄ ► key.
 Once selected, operator can use ▲ key by continue
pressing until achieving the desire batch number. Once completed with a denomination, move
to next denomination by using ◄ ► keys.
 Repeat the process. Once process is completed, press
to main screen. For further details, please see page 10.
 Stacker Capacity:
Operator has option to set maximum stacker capacity
to 100 or 200 (Maximum) and can be set by entering
 Stacker Capacity.
Enter  Stacker Capacity  select 100 or 200 using
◄ ► key and confirm by
to return to main screen.
Page | 22
navigation
and then
key  MENU 4. Setting DB
and then
keys to
key to return to main screen.
key
and then key to return