Function And Environmental Settings; Service Menu; Version Information - Amrotec MIB-1 Operator's Manual

 Function and Environmental Settings
This chapter is reserved for trained operator or service professional. To verify or to set a function
and its environmental parameters settings, enter MENU Setting by pressing
How to:
Press (1-10 keys) on the control panel to select to a
specific menu item or use ▲▼ key to move up or
down on menu item and then press
specific menu item selected. Once changes are done,
press to confirm your selection and return to
main screen.
 Service Menu:
Service Menu is reserved for service professional or service provider and require a password to
enter the Service Menu to make critical settings change which could significantly affect the
counting results.
. Service Menu 
 Version Information:
Enter . Version Information to view software and hardware version of operator's MIB-1.
Password is not required. Once in this VERSION
screen, device will display device Hardware (HW)
and Software versions (Main, Image, FPGA) that
are loaded into this particular MIB-1 and are
needed for your sales or service provider to trouble
shoot a problem or to understand the need for a
software upgrade.
Page | 21
to enter
 Password (XXXX)  Enter into Setting Mode
key.