System Setup - Hyundai PDP735SU Instruction Manual

SYSTEM SETUP

Menu Operation
1) In DVD mode, press [SETUP] on the remote control or on the unit to show the setup menu.
2) Press [LEFT]/[RIGHT] to select an item. The submenu of the selected item will be displayed.
3) Press [UP]/[DOWN] to select an item you desire to set in the submenu, then press ENTER]/
[RIGHT]/[OK] to enter. Use [UP]/[DOWN] to select an option, then press [ENTER]/[OK] to
confirm, or press [LEFT] to cancel.
4) Then you can press [UP]/[DOWN] to continue to set other items in the submenu.
5) Press [LEFT] to return to the upper menu.
6) Press [SETUP] again to exit the setup menu. You can also move the highlight to
press [ENTER]/[OK] to exit.
1.1 TV DISPLAY
If the unit is connected to a conventional TV set, you are supposed to select 4:3 PANSCAN or
4:3 LETTERBOX. The 4:3 image will be displayed in full screen in its native aspect ratio.
4:3 PANSCAN The wide-screen image will be displayed on the screen in its native
aspect ratio with some part on the left and right cut off.
4:3 LETTERBOX The wide-screen image will be displayed in its native aspect ratio with black
bands on the upper and lower sections of the screen.
16:9: If the unit is connected to a wide-screen TV set, you are supposed to select this option.
The wide-screen image will be displayed in full screen in its native aspect ratio while the 4:3
image will be stretched out horizontally to fit in the screen.
1.2 ANGLE MARK
Set this item to ON. When a disc with multiple camera angles is playing, an angle mark
will display on the screen. Then you can view the video of different camera angles by
pressing [ANGLE] on the remote control. Set this item to OFF to hide the angle mark.
1.3 OSD LANGUAGE (On-Screen Display Language)
Set the on-screen display language in this item.
1.4 CLOSED CAPTIONS
Set this item to ON. When a disc encoded with closed captions, the closed captions will
be shown on the screen. Set this item to OFF to hide it. You can also press [SUBTITLE] on the
remote control to show or hide the closed captions.
NOTE: This function only works with those discs encoded with closed captions.
1.5 SCREEN SAVER
ON: If the image remains motionless on the screen, for example the disc is paused, stopped
etc, for several minutes, a screen saver will appear on the screen. You can press any key or
button to wake it up.
OFF: Disable the screen saver function.
1 GENERAL SETUP PAGE
There are six items in the GENERAL SETUP PAGE. They
are TV DISPLAY, ANGLE MARK, OSD LANGUAGE,
CLOSED CAPTIONS, SCREEN SAVER and LAST
MEMORY.
ENG - 65
ENG
, then