Listening To Radio Broadcasts; Tuning Radio Stations; Presetting Radio Stations Manually - Kenwood VR-9050 Instruction Manual

Listening to radio broadcasts

The receiver can store up to 40 stations in the memory and recall them
by one-touch operation.

Tuning radio stations

BAND
TUNER
BAND
TUNER
1
Use the TUNER key to select the tuner.
2
Use the BAND key to select the desired broadcast band.
Each press switches the band.
SP MUTE
A B CLIP
L C R
LFE
SL S SB SR
3
Use the AUTO/MONO key to select the desired tuning method.
Each press switches the tuning method to either auto or manual
tuning.
"AUTO" indicator lights up in the display.
• Normally, set to "AUTO" (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4
Use the MULTI CONTROL knob or MULTI % / fi keys, or
TUNING 1 / ¡ keys to select the station.
"STEREO" lights when a broadcast is being received in stereo.
"TUNED" is displayed when a station is received.
Auto tuning : The next station is tuned automatically.
Manual tuning : Turn the knob or use the MULTI %/fi keys to
select the desired station.
24 EN
MULTI CONTROL
AUTO/MONO
MULTI %/ fi
AUTO/MONO
TUNING 1/¡
STEREO
RDS
STEREO
RTY
AUTO
STEREO
AUTO
MEMO
STEREO
TUNED

Presetting radio stations manually

TUNER
1
Tune to the station you want to store.
2
Press the MEMORY key while receiving the station.
Blinks for 20 seconds
SP
A B
L C R
LFE
SL S SB SR
AUTO
Proceed to step 3 within 20 seconds.
(If more than 20 seconds elapse, press the MEMORY key again).
3
Use the MULTI CONTROL knob or MULTI % / fi keys to select
one of the station presets (1 – 40).
4
Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3 and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.
MULTI CONTROL
TUNER MEMORY
MULTI %/ fi
Lights for 20 seconds
MUTE
CLIP
STEREO
AUTO
MEMORY MEMORY
STEREO
TUNED