Digital Connections - Kenwood VR-9050 Instruction Manual

Setting up the system

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section carefully.
COAXIAL
DIGITAL
OUT
(AUDIO)
RF digital demodulator
(Commercially available)
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the RF digital demodulator (Commercially available).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See "Connecting video components".)
COAXIAL OPTICAL OPTICAL
CD/DVD VIDEO 3
VIDEO
2
DVD/
6CH
DIGITAL IN
Optical
fiber cable
Optical fiber cable
OPTICAL DIGITAL
Component with DTS,
OUT (AUDIO)
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Connect the video signal and digital
audio signals to the VIDEO 3 jacks.
(See "Connecting video compo-
nents".)
OPTICAL DIGITAL
OUT (AUDIO)
DVD Player or CD Player
COAXIAL DIGITAL
Component with DTS,
OUT (AUDIO)
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video compo-
nents".)
DOLBY DIGITAL RF
OUT (AUDIO)
PCM OUT
LD Player
8
@
@
13 EN