Kenwood VR-9050 Instruction Manual page 19

Preparing for surround sound
6
Input the distance to the speakers.
• Indicators appear only for the channels of the speakers selected
in step 3.
1 Press the keys or MULTI @/# keys to select the SP
∧ ∨
/
DISTANCE on setup displays and press the SETUP key again.
2 Measure the distance from the listening position to each of
the speakers.
Jot down the distance to each of the speakers.
Distance to Front Left Speaker (L)
Distance to Center Speaker (C)
Distance to Front Right Speaker (R)
Distance to Surround Right (SR)
Distance to Surround Back Right (SBR) : ____ feet (meters)
Distance to Surround Back (SB)
Distance to Surround Back Left (SBL) : ____ feet (meters)
Distance to Surround Left (SL)
Distance to Subwoofer (SW)
• If you have selected "SB NORMALx1" or "SB LARGEx1",
"SBR" and "SBL" are not appeared but "SB" is appeared on the
Display.
3 Use the keys or MULTI @/# keys to select the speakers
∧ ∨
/
and the MULTI CONTROL knob or MULTI %/fi keys to adjust
the distance to the Front Speakers.
The speaker indicator to be adjusted blinks.
SP MUTE
A B CLIP
L C SW R
LFE
SL S SB SR
Indication in feet
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
4 Repeat steps 3 to input the distance for each of the speakers.
5 Press the SETUP key again to return to main setup displays.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
7
Adjust the LFE LEVEL (Low Frequency Effects).
1 Press the keys or MULTI @/#keys to select the LFE
∧ ∨
/
LEVEL.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust
the LFE LEVEL.
SP MUTE
A B CLIP
L R
• The LFE LEVEL can be adjusted from 0dB to -10dB in 1dB
decrements.
3 Press the SETUP key again to return to main setup displays.
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
STEREO
Indication in meters
STEREO
8
Select the display mode.
1 Press the keys or MULTI @/# keys to select the DISP
∧ ∨
/
MODE.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the display mode.
1 DISP SELECTOR : Displays the current input selector.
2 DISP LISTEN
: Displays the current listen mode.
SP MUTE
A B CLIP
L R
3 Press the SETUP key again to accept the setting.
4 Use the key or MULTI # key to select EXIT.
∧
SP MUTE
A B CLIP
L R
SL S SB SR
5 Press the SETUP key to exit the SETUP mode.
STEREO
STEREO
19 EN