Listening To Radio Broadcasts; Tuning (Non-Rds) Radio Stations; Using Rds (Radio Data System) - Kenwood KRF-V5090D Instruction Manual

Listening to radio broadcasts

This model can store up to 40 stations in the memory and recall them by
one-touch operation.
Radio stations can be classified into RDS (Radio Data System) stations
and other stations. To listen to or store RDS stations in the preset
memory see "Using RDS (Radio Data System)".

Tuning (non-RDS) radio stations

MULTI CONTROL
BAND AUTO/MONO
TUNER
BAND
1
Use the INPUT SELECTOR knob or TUNER key to select the
tuner.
2
Use the BAND key to select the desired broadcast band.
Each press switches the band
as follows:
1 FM
2 AM
3
Use the AUTO/MONO key to select the desired tuning method.
Each press switches the tuning method as follows:
1 AUTO lit (auto tuning)
2 AUTO not lit (manual tuning)
"AUTO" indicator lights up in the display.
• Normally, set to "AUTO" (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4
Use the MULTI CONTROL knob or MULTI CONTROL % / fi keys,
or TUNING 1 / ¡ keys to select the station.
"ST." lights when a broadcast
is being received in stereo.
"TUNED" is displayed
when a station is received.
Auto tuning : The next station is tuned automatically.
Manual tuning : Turn the knob (press the key) to select the desired
station.
INPUT SELECTOR
MULTI CONTROL
AUTO/MONO
TUNING
"AM" or "FM" indicator
appears in the display
Frequency display

Using RDS (Radio Data System)

RDS is a system that transmits useful information (in the form of digital
data) for FM broadcasts along with the broadcast signal. Tuners and
receivers designed for RDS reception can extract the information from
the broadcast signal for use with various functions, such as automatic
display of the station name.
RDS functions:
PTY (Program TYpe Identification) Search
Automatically tunes to a station that is currently broadcasting the
specified program type (genre).
PS (Program Service Name) Display
Automatically displays the station name transmitted by the RDS
station.
RDS AUTO MEMORY function
Automatically selects and stores up to 40 RDS stations in the preset
memory.
If fewer than 40 RDS stations have been stored in the preset memory,
regular FM stations will be stored in the remaining places.
Radio Text function
Displays the radio text data transmitted by some RDS stations when
you press the RDS DISP. (Display) key. There is "NO RT" display if no
text data is transmitted.
The "RDS" indicator lights up when an RDS broadcast (signal) is
received.
Note
Some functions and function names may differ for certain countries
and areas.
Before using a function utilizing the RDS, be sure to perform the RDS
Auto Memory operation by referring to the description in "Presetting
RDS stations (RDS AUTO MEMORY)".
¢
¢
¢
21 EN