Download  Print this page

Kenwood VR-9050 Instruction Manual page 31

Kenwood instruction manual audio video surround receiver vr-9050
Hide thumbs

Advertisement

Convenient functions
Midnight mode (Dolby Digital and DTS mode only)
When watching movies at night , you might not be able to raise the volume as
loud as normal. Midnight mode compresses the dynamic range of previously
specified heavy sound passage of the Dolby Digital and DTS sound track (like
scenes with sudden increases in volume) to minimize the difference in volume
between the scenes with heavy sound passage and scenes with normal sound
passage. This makes it easy to hear all of the sound track, even when listening
at low volumes.
1 Press the SOUND key, then press the
until "MIDNIGHT" appears on the display.
• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3
is selected as the source and the input signal is set to "DOLBY
DIGITAL" or "DTS".
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select the
ON or OFF setting.
SP
MUTE
AUTO DETECT
DIGITAL
A B
CLIP
L
C
R
LFE
SL
S
SB
SR
• The adjustment item is displayed for approximately 20 seconds.
• Some Dolby Digital or DTS software may not be compatible with the
Midnight mode.
3 Press the SOUND key again to return to the input indication.
Panorama mode (Pro Logic II x Music mode and Pro Logic II
Music mode only)
When listening to music, you will be able to enjoy the "wrap-around"
sound effect when you adjust the panorama mode.
1 Press the SOUND key, then press the
until "PANORAMA" appears on the display.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
PANORAMA ON or OFF.
1 PANORAMA ON : PANORAMA mode is ON.
2 PANORAMA OFF : PANORAMA mode is OFF.
SP
MUTE
AUTO DETECT
A B
CLIP
L
R
LFE
S
SB
3 Press the SOUND key again to return to the input indication.
keys or MULTI @/# keys
/
DOLBY DIGITAL
STEREO
keys or MULTI @/# keys
/
STEREO
DOLBY PL II x
Dimension mode (Pro Logic II x Music mode and Pro Logic II
Music mode only)
When listening to music with certain recordings, you will also be able to achieve
a suitable balance from all the speakers by adjusting the dimension mode.
1 Press the SOUND key, then press the
until "DIMENSION" appears on the display.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the
soundfield towards the rear or the front.
Soundfield is adjusted towards the front.
SP
MUTE
AUTO DETECT
A B
CLIP
L
R
LFE
Soundfield is in neutral position.
SP
MUTE
AUTO DETECT
A B
CLIP
L
R
LFE
S
SB
Soundfield is adjusted towards the rear.
SP
MUTE
AUTO DETECT
A B
CLIP
L
R
LFE
3 Press the SOUND key again to return to the input indication.
Center Width mode (Pro Logic II x Music mode and Pro Logic II
Music mode only)
Center width adjustment allows you to enjoy an enhanced sound when
listening to music through center image from only center speaker, or left
and right speakers or various combinations adjustments.
1 Press the SOUND key, then press the
until "CENTER WIDTH" appears on the display.
• The CENTER WIDTH indication scrolls across the display.
• When the center speaker is switched OFF, this mode will not be
effective.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the
left-center-right output.
Center image will be heard from center speaker only.
SP
MUTE
AUTO DETECT
A B
CLIP
L
R
LFE
S
SB
Center image will be heard from left and right speakers only.
SP
MUTE
AUTO DETECT
A B
CLIP
L
R
LFE
S
SB
• When in other position, center image from center speaker, left and
right speakers can be heard simultaneously with various combinations.
3 Press the SOUND key again to return to the input indication.
keys or MULTI @/# keys
/
DOLBY PL II x
DOLBY PL II x
DOLBY PL II x
keys or MULTI @/# keys
/
DOLBY PL II x
DOLBY PL II x
31
EN

Advertisement

loading

  Related Manuals for Kenwood VR-9050

This manual is also suitable for:

Vr-9050-s