Listening To Radio Broadcasts; Tuning Radio Stations; Presetting Radio Stations Manually; Receiving Preset Stations - Kenwood VR-6060 Instruction Manual

Listening to radio broadcasts

The receiver can store up to 40 stations in the memory and recall them
by one-touch operation.

Tuning radio stations

BAND
TUNER
AUTO
TUNER
1
Use the TUNER key to select the tuner.
2
Use the BAND key to select the desired broadcast band.
Each press switches the band :
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
3
Use the AUTO key to select the desired tuning method.
Each press switches the tuning method to either auto or
manual tuning.
"AUTO" indicator lights up in the display.
PTICAL 6CH INPUT CINEMA EQ. DTS.
AUTO DETECT
ACTIVE EQ. MATRIX
OAXIAL ANALOG 96kHzfs DSP MODE DISCRETE
• Normally, set to "AUTO" (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4
Use the MULTI CONTROL knob or Joystick to select the
station.
"STEREO" lights when a broadcast is being received in stereo.
OPTICAL 6CH INPUT CINEMA EQ. DTS.
AUTO DETECT
ACTIVE EQ. MATRIX
COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE
"TUNED" is displayed when a station is received.
Auto tuning : The next station is tuned automatically.
Manual tuning : Turn the knob or use the Joystick to select the
desired station.
•VR609/20-28/EN
MULTI CONTROL
AUTO
Joystick
BAND
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
ACTIVE EQ. MATRIX
RTY
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
DOLBY DIGITAL STEREO NEO:6 RDS
THX
RTY
Surround EX
PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
DOLBY DIGITAL STEREO NEO:6 RDS
THX
RTY
Surround EX
PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
27

Presetting radio stations manually

TUNER MEMORY
1
Tune to the station you want to store.
2
Press the MEMORY key while receiving the station.
Blinks for 5 seconds
SP MUTE OPTICAL 6CH INPUT CINEMA EQ.
AUTO DETECT
ACTIVE EQ.
A B CLIP
COAXIAL ANALOG 96kHzfs DSP MODE
L C SW R
LFE
SL S SB SR
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
3
Use the MULTI CONTROL knob to select one of the station
presets (1 – 40).
4
Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.

Receiving preset stations

Numeric
1
Press the TUNER key to select tuner as the source.
2
Enter the number of the preset station you want to receive
(up to "40").
Press the numeric keys in the following order:
0,5
For "15", press
0,0,)
For "20", press
• If you make a mistake entering a two digit number, press the +10
key repeatedly to return to the original display and start again.
SP MUTE OPTICAL 6CH INPUT CINEMA EQ.
AUTO DETECT
ACTIVE EQ.
A B CLIP
COAXIAL ANALOG 96kHzfs DSP MODE
L C SW R
LFE
SL S SB SR
10/24/01, 10:37 PM
MULTI CONTROL
Lights for 5 seconds
DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
MATRIX
RTY
Surround EX
DISCRETE PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
TUNER
DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
MATRIX
RTY
Surround EX
DISCRETE PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
Continued to next page
27
EN