Advertisement
TECHNICAL CHARACTERISTICS in accordance with EN 13229
The data shown below refers to the actual installation and use and was taken during the certification phase by a
notified body under the conditions specified by the standard.
The results were obtained with the glass cleaning system off, by the installer.
Burned thermal power
Nominal thermal power
Power available to water
Yield
CO emissions at 13% O
Average smoke temperature
Draw
Fuel consumption *
Maximum operating pressure
Maximum operating temperature
Water content
Delivery to heating system (male)
Return from heating system (male)
Heatable volume **
Smoke outlet diameter
Air intake diameter
Weight including packaging
6
Environmental class according to Italian Min. Decree 186
Energy efficiency class in accordance with EU regula-
tion 2015-1186 (Classes A++/G)
* The calculation of fuel consumption assumes a calorific value of 4.6 kW/kg for wood.
** The heatable volume is calculated based on the assumption of a heating demand of 33 Kcal/m³ hour.
The product can work safely even with greater draught.
Excessive draught could cause the product to switch off and/or lower its performance.
NOTE: the smoke outlet diameter does not match the chimney system diameter, which must be
sized accordingly.
TECHNICAL DATA FOR SIZING THE FLUE
which must in any case satisfy the requirements of this sheet and the installation instructions
Smoke temperature at smoke outlet
Minimum draught
Smoke flow rate
Intermittent combustion device
Position five pieces of dry wood with 33-cm length, placed horizontally.
EDILKAMIN S.p.A. reserves the right to modify the product at its own discretion and
without prior notice, with a view to improvements.
TECHNICAL DATA
2
Widro 85 - Widro 85 CS
Nominal power
34.7
29.7
18.2
85.7
0.068
238
238
115
775
200
130
561
4 stars
Widro 85 - Widro 85 CS
Nominal power
286
18.1
USER/INSTALLER
11
7.5
3
1"
1"
A+
8
kW
kW
kW
%
%
°C
Pa
kg/h
bar
°C
litres
inch
inch
m³
mm
mm
kg
°C
Pa
rps
Advertisement
