Changing Speaker Configurations - Kenwood TM-V7A Instruction Manual

CHANGING SPEAKER CONFIGURATIONS

1
You can enjoy a variety of speaker configurations by using
one or two external speakers. Select either mode 1 or
2
mode 2 depending on which band the internal speaker
3
and/or the external speakers should function.
4
When using one external speaker connected to speaker jack 1:
5
Mode 1: VHF band (external)/ UHF band (external)
Mode 2: VHF band (external)/ UHF band (external)
6
When using one external speaker connected to speaker jack 2:
7
Mode 1: VHF band (internal)/ UHF band (external)
8
Mode 2: VHF band (external)/ UHF band (internal)
9
When using two external speakers:
10
Mode 1: VHF band (external 1)/ UHF band (external 2)
Mode 2: VHF band (external 2)/ UHF band (external 1)
11
12
13
14
15
16
17
18
19
20
21
76
1 Press [MNU] to enter Menu mode.
2 Select Menu No. 14 (Audio).
3 Press [ s s s s s ] , then select Item No. 2 (Speaker).
CALL CALL
2
1
4 Press [SET] to toggle mode 1 (default) or mode 2.
5 Press [MNU] again to exit Menu mode.
PWR PWR
VOL SQL