Table of Contents
Advertisement
PROGRAM SCAN
1
Program Scan is similar to VFO Scan except that you
select the frequency range of the scan.
2
3
Setting Scan Limits
4
You can store up to three scan ranges on each band,
using memory channels L1/U1, L2/U2, and L3/U3.
5
1 Select the desired band.
6
2 Turn the Tuning control, or press Mic [UP]/[DWN],
7
to display the desired lower limit.
8
3 Press [F] .
9
4 Turn the Tuning control, or press Mic [UP]/[DWN],
to select channel L1, L2, or L3.
10
11
12
13
14
5 Press [MR].
15
•
The lower limit is stored in the channel.
16
17
18
19
20
21
46
6 Turn the Tuning control, or press Mic [UP]/[DWN],
to display the desired upper limit.
7 Press [F] .
8 Turn the Tuning control, or press Mic [UP]/[DWN],
to select channel U1, U2, or U3.
•
If you have selected for example L1 in step 4,
select U1.
9 Press [MR].
•
The upper limit is stored in the channel.
10 To confirm the stored scan limits, press [MR], then
select the L and U channels.
Note:
The lower limit must be lower in frequency than the upper limit.
The lower and upper frequency steps must be equal.
The lower and upper limits must be selected on the same band.
Advertisement
Table of Contents
