Table of Contents
Advertisement
SELECTING FREQUENCIES
Tuning Control
Using the Tuning control is convenient when you are
within easy reach of the transceiver front panel, and the
frequencies to be selected lie near the current
frequency.
1 Press [VFO] to select VFO mode.
CALL
CALL
2 Turn the Tuning control to select a receive
frequency.
CALL
CALL
2
•
Clockwise rotation increases the frequency one
frequency step at a time.
•
Counterclockwise rotation decreases the frequency
one step at a time.
•
To change frequencies in steps of 1 MHz, press [MHz]
first. Pressing [MHz] again cancels the 1 MHz
function. To change in steps of 10 MHz, press
[F] + [MHz] first. Pressing [F] cancels the 10 MHz
function; pressing [MHz] starts the 1 MHz function.
PWR
PWR
VOL
SQL
PWR
PWR
VOL
SQL
•
If you cannot select a particular receive frequency, the
frequency step size needs to be changed. See
"CHANGING FREQUENCY STEP SIZE" {page 65} for
further information.
•
You can also select frequencies via the microphone
keypad (MC-53DM only). See "KEYPAD DIRECT
ENTRY" {page 74}.
Microphone [UP]/[DWN] Buttons
Using Mic [UP]/[DWN] for frequency selection is useful
when mobiling or any time you are not immediately in
front of the transceiver.
Press [UP] or [DWN] once to change the receive
frequency by one frequency step in the direction
indicated by the button.
•
Pressing and holding either button causes the frequency
to step repeatedly in one direction until the button is
released.
•
To change frequencies in steps of 1 MHz (or 10 MHz),
press [MHz] (or [F] + [MHz]) first.
MC-53DM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
17
Advertisement
Table of Contents
