Program Scan; Scan Hold; Confirming Start/End Limits - Kenwood TS-870S Instruction Manual

: -Scan Type: et
while in VFO mode.
Tres a
memory channels.
channels.
PROGRAM SCAN
StarVEnd = = poe
"Frequency ~
Relationship.
Current
"ES Program Scan
cerequency. [=
Abllon
Within Scan Up
Start frequency | range
LOWER THAN
End frequency
Lower or higher
than Scan range
Jumps to Start
trequency, then
scans up.
Start frequency
EQUAL TO
End frequency
StarvEnd
frequency
Monitors
StarvEnd
frequency.
Lower or higher
than Start/End
frequency
Jumps to
Start/End
frequency and
monitors it.
Start frequency
HIGHER THAN
End frequency
Within Scan
range
Down
Lower or higher
than Scan range;
Jumps to Start
frequency, then
scans down.
SCAN HOLD
While using Program Scan, if Menu No. 65
(PG.S.HOLD) is switched ON, then turning the Tuning
or M.CH/VFO.CH contro! stops the transceiver fram
scanning for approximately five seconds. This is also
true if Mic [UP] or [DWN] is pressed. Program Scan
resumes after the five second pause. The default is
OFF.
CONFIRMING START/END LIMITS
1 Recall memory channel! 99.
2 Press [DOWN] to check the Start frequency and
press [UP] to check the End frequency.