Mp3/Jpeg Program Playback - Kenwood DV-705 Instruction Manual

44
MP3 program playback
You can listen to the desired files of the current MP3 disc in any desired order.
It is not possible to program playback of JPEG files.
Program play for MP3 files can be per-
formed with the same operation as for mu-
sic CDs and VCDs.
Program Edit
1
Press the P.MODE key on the remote.
As the information for all set discs is read, some
time may be required until the program screen is
displayed.
2
Press Cursor right (3) key.
3
Press Cursor up/down (5/∞) keys to select
"Add" icon, then press ENTER key.
MULTI CONTROL
For correction after programming, select a
different icon instead of the "Add" icon.
4
Press Cursor up/down (5/∞) keys to select
Disc No., then press ENTER key.
MULTI CONTROL
5
Press Cursor up/down (5/∞) keys to select
track, then press ENTER key.
MULTI CONTROL
6
You can select maximum 19 values by repeating
step 2 - 5.
7
Press the play/pause (6)key on the remote
or play (3) key on the main unit to start pro-
gram play.
P.MODE
MULTI CONTROL
ENTER
ENTER
ENTER
fi
Program edit display appears.
"Add"
"Insert" : Adds a track between programs. In
"Modify" : Modifies the program.
"Delete" : Deletes the selected program.
"Clear"
÷ Program playback will start from the selected pro-
gram.
÷ Playback will stop when the end of the program is
reached.
To stop program play, press the stop (7) key.
MP3 /JPEG media playback Set Up functions
DV-705/DVF-R5070 (EN/K,P,E,Y)
: Adds a track to the program.
this case, insertion is made above (be-
fore) the selected program.
: Deletes all programs.
"Add"
icon
Disc No.