Getting Ready To Connect; Connecting To A Computer - Casio KL-P350W User Manual

■ ■ Access Point Mode
In this mode, you can establish a direct wireless LAN connection between the printer and
a computer or phone.
Since the printer functions as an access point, it can connect to another device even
when a wireless LAN router or another wireless LAN access point environment is not
available.

Getting Ready to Connect

1.
Connect the AC adaptor and power cord to the printer.
• See steps 2 through 4 under "Connecting with the USB Cable (Computer Only)"
(page 21).
2.
On the printer, press

Connecting to a Computer

■ ■ Connecting with the Client Mode
In this mode, you can connect the printer as a client in the wireless LAN environment you
are using. You can connect the printer to a computer via a wireless LAN router or wireless
LAN access point.
1.
On the printer, hold down
• This puts the printer into simple connection standby, which is indicated by the
wireless LAN lamp flashing green, in two quick flash bursts
2.
Within about the next two minutes, press the WPS (Wi-Fi Protected Setup) button of
the wireless LAN router/access point you are using.
• This puts the wireless LAN router/access point into WPS standby.
• For details about WPS button operation and other information, refer to the user
documentation for the wireless LAN router/access point you are using.
• When a connection is established, the printer's wireless LAN lamp lights green.
• To configure settings manually, perform the following operation on your computer
with LABEL DESIGN MAKER: Settings - Wireless LAN settings - Select connect
device. Next, configure the settings that appear.
to turn on power.
for at least three seconds.
24
(page 35).