Changing Or Replacing; Changing The Component In The Multi-Purpose Bay - Getac S410 Series User Manual

Changing or Replacing

Changing the Component in the Multi-
Purpose Bay
If you have a user-removable component in the multi-purpose bay, you can
purchase a different one and change the component as needed.
1. Turn off the computer and disconnect the AC adapter.
Skip this step if you are removing the battery pack in the multi-purpose
bay for the purpose of hot swapping.
2. Carefully place the computer upside down.
3. If removing the optical disc drive, unfasten the screw that secures the
drive.
4. Slide the security latch to the unlocked position (
there. Meanwhile, grasp the edge of the existing component using the
other hand and pull it out of the bay (
 )
.
54
) (  ) and hold it