Frequency Setting Of High Pass Filter For Front Output; Frequency Setting Of High Pass Filter For Rear Output; Filter Slope Setting Of High Pass Filter; Frequency Setting Of Low Pass Filter For Non-Fading Output - Kenwood DPX-5010 Instruction Manual

Function set system
Function items in Other mode:
<In Tuner/CD/Cassette/External disc control mode>

1. Frequency Setting of High Pass Filter for Front Output

You can select the frequency to be cut of the high pass filter for
front output.
Display and setting
"HPF-F Off/30/60/90/120/150/180/250" (Hz)

2. Frequency Setting of High Pass Filter for Rear Output

You can select the frequency to be cut of the high pass filter for
rear output.
Display and setting
"HPF-R Off/30/60/90/120/150/180/250" (Hz)

3. Filter Slope Setting of High Pass Filter

You can select the filter slope of the high pass filter.
Display and setting
"HPF Slope 12/18/24" (dB/Octave)

4. Frequency Setting of Low Pass Filter for Non-fading Output

You can select the frequency to be cut of the low pass filter for
non-fading output.
Display and setting
"LPF Off/150/120/100/80/60" (Hz)

5. Filter Slope Setting of Low Pass Filter

You can select the filter slope of the low pass filter.
Display and setting
"LPF Slope 12/18/24" (dB/Octave)

6. Time Alignment for Front Output

You can adjust the delay of sounds from front output during
using the DSP.
Display and setting
"T-Alg F OFF/0.5~18" (msec.)

7. Time Alignment for Rear Output

You can adjust the delay of sounds from rear output during
using the DSP.
Display and setting
"T-Alg R OFF/0.5~18" (msec.)

8. Time Alignment for Non-fading Output

You can adjust the delay of sounds from non-fading output
during using the DSP.
Display and setting
"T-Alg NF OFF/0.5~18" (msec.)

9. External Amp Control Setting

Adjust the bass boost level of the external amplifier using the
main unit.
Display and setting
"Amp Cont 1": Bass boost level is flat.
"Amp Cont 2": Bass boost level is low. (+6 dB)
"Amp Cont 3": Bass boost level is high. (+12 dB)
NOTE
As of December 1998, the power amplifiers controllable by the
main unit are as follows:
KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T
— 32 —