Direct Disc Search; Track / Disc Repeat; Track Scan - Kenwood DPX-5010 Instruction Manual

The track starts playing.
Canceling Direct Track Search While It Is Operating:
Press the 38 button.
NOTE
You cannot use the direct track search function while doing track
or disc scans or using random or magazine-random play.

Direct Disc Search

Function of disc changers with remote
Using the remote, directly input the disc number that you want
to listen to.
1
Using the number buttons on the remote, input the number of
the disc that you want to listen to.
The selected disc number will blink in the display for 10
seconds.
If you make no further input in the 10-second period, the
number entry mode will automatically be canceled.
NOTE
• Input "0" to select disc 10.
• If you input more than two numbers all at once, a search will be
made only of the last number input.
+
2
Press either the DISC or DISC
inputted is blinking.
The disc starts playing.
Canceling Direct Disc Search While It Is Operating:
Press the 38 button.
(See page 34)
–
button while the number
— 17 —

Track / Disc Repeat

Repeat playing the track or the disc currently being listened to.
Turning Repeat Play On/Off:
Press the REP button to switch repeat track/disc play on and
off as follows:
Track Repeat ON
Disc Repeat ON (Function of disc changers)
Track/Disc Repeat OFF
The REP indicator lights up in the display when track repeat is
on.
The D.REP indicator lights up in the display when disc repeat is
on.
NOTE
Repeat play is canceled when you stop playing the disc.

Track Scan

Successively play the beginning of each track on a disc until
you find the track that you want to listen to.
Starting the Track Scan :
Press the SCN button. The SCN indicator lights up and the first
10 seconds of each track will be played, in order.
The track number currently being heard blinks in the display.
Stopping to Listen to the Track Being Scanned:
Press the 38 or SCN button again to stop the scan and keep
on listening to a track normally.
NOTE
• The track scan function is cancelled when you stop playing a
disc.
• The track scan function only scans each track on a disc once.