Kenwood DPX-5010 Instruction Manual page 41

Installation type 2
1
Attach Accessory8 which
was assembled in
Assembly.
Accessory8 is to be fixed either
to the center or bottom,
depending on the car model.
Accessory0
(M5 6 mm)
DPX-5010
Accessory8
Accessory9
(M3
Installation type 3
1
Attach Accessory@ to
Accessory8 which was
assembled in Assembly.
Accessory0
(M5 6 mm)
Accessory8
DPX-5010
Accessory9
Accessory!
(M3 6 mm)
(M5 10 mm)
Accessory@
2
Remove the factory-installed
car stereo and install the unit.
Factory-installed
car stereo
DPX-5010
Accessory!
(M5 10 mm)
6 mm)
2
Remove the factory-installed car
stereo and install the unit.
Factory-installed
car stereo
DPX-5010
Reuse the screws
that were removed.
— 41 —