Spectrum Analyzer Display Selection - Kenwood DPX-5010 Instruction Manual

Graphic Equalizer features

Spectrum Analyzer Display Selection

You can select the display to enjoy sounds with eyes.
Switching the Preset Spectrum Analyzer Display:
1
Press the EQ button. "EQ CTRL" is displayed once the Graphic
equalizer mode is entered.
2
Press the DISP button.
The spectrum analyzer name currently set appears in the
display.
3
Each time you press the DISP button, the spectrum analyzer
display switches as follows;
"Peak Hold" "Trump"
"Bird Wing" "Wave" "Heart Attack"
WH-#" (User setting)
NOTE
You can set the combination of the separate settings for the Blue
and White analyzers as mentioned below.
If you switch the setting of them, it will be stored as a User
setting.
• The "#" display indicates the setting value.
• The default setting is "B-scn / WH-scn". The preset spectrum
analyzer display switches in sequence.
4
Press the EQ button to end the Graphic equalizer mode.
Switching Only the Blue Analyzer Display:
1
Press the EQ button. "EQ CTRL" is displayed once the Graphic
equalizer mode is entered.
2
Each time you press the button #5, the Blue analyzer display
switches as follows;
"B-1" "B-2" "B-3" "B-4"
"B-scn" (scanning from "B-1" to "B-8" display)
NOTE
You cannot switch this display when the Preset Spectrum
Analyzer is set to "Source".
3
Press the EQ button to end the Graphic equalizer mode.
Switching Only the White Analyzer Display:
1
Press the EQ button. "EQ CTRL" is displayed once the Graphic
"Aurora" "Falling Star" "Missile"
"Source" "B-# /
"B-5" "B-6" "B-7" "B-8"
"B-off" (Off)
equalizer mode is entered.
2
Each time you press the button #6, the White analyzer display
switches as follows;
"WH-1" "WH-2"
"WH-7" "WH-8" "WH-scn" (scanning from "WH-1" to "WH-8"
display) "WH-off" (Off)
NOTE
You cannot switch this display when the Preset Spectrum
Analyzer is set to "Source".
3
Press the EQ button to end the Graphic equalizer mode.
— 26 —
"WH-3" "WH-4" "WH-5" "WH-6"