Bass Level; Middle Level; Treble Level; Balance Level - Kenwood KDC-6090R Instruction Manual

Audio control features

Bass Level

Adjust the bass level.
Display and setting:
"Bass" : - 8 – + 8

Middle Level

Adjust the middle level.
Display and setting:
"Middle"/"MID" : - 8 – + 8

Treble Level

Adjust the treble level.
Display and setting:
"Treble"/"TRE" : - 8 – + 8

Balance Level

Adjust the balance level.
Display and setting:
"Balance" : Left 15 – Right 15

Fader Level

Adjust the fader level.
Display and setting:
"Fader" : Rear 15 – Front 15

Non-Fading Level

Adjust the Non-fading output level.
Display and setting:
"NF Level" : - 15 – + 15
NOTE
This mode is available only when the non-fading output function is
set to on.

High-pass Filter Frequency for Front Output

Adjust the frequency of the High-pass filter for front output.
Display and setting:
"HPF F" : Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /
150Hz / 180Hz / 220Hz
NOTE
You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter works except
during non-fading preout when switched to non-fading.

High-pass Filter Frequency for Rear Output

Adjust the frequency of the High-pass filter for rear output.
Display and setting:
"HPF R" : Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /
150Hz / 180Hz / 220Hz
NOTE
You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter works except
during non-fading preout when switched to non-fading.
— 14 —
Function of the KDC-6090R
Function of the KDC-6090R
Function of the KDC-6090R