Kenwood DPX-5010 Instruction Manual page 39

Installation (for TOYOTA, NISSAN Car etc.)
2CAUTION
When performing a check of the CD operation prior to installation,
place this unit in a hirizontal position and perform a loading/eject of
the CD.
Installation
Install onto the car bracket using the supplied screws (M5
mm). The holes of the car bracket to use will differ depending on
the car model.
Accessory2
(M4 6 mm)
When a ground wire is
included in the wiring kit
(which is sold separately),
fasten the ground wire
with the binding screw
located on the rear panel
of this unit.
Accessory3
(Only for NISSAN car)
6
Accessory1
or Accessory0
(M5 6 mm)
— 39 —