Maintenance And Care; Transportation; Environment - Festool CLEANTEC CTLC SYS I Original Instructions Manual

Cordless mobile
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 18
English
Warning
Description of warning signal
signal
Acoustic
Signal

14 Maintenance and care

WARNING
Risk of injury, electric shock
► Before all maintenance and care work, al­
ways remove the battery pack from the
cordless mobile dust extractor.
► All maintenance and repair work which re­
quires the motor housing to be opened
must always be carried out by an author­
ised service workshop.
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festool.co.uk/service
Always use original Festool spare
EKAT
4
parts. Order no. at:
www.festool.co.uk/service
5
3
2
1
Observe the following information:
Dust-related inspection (e.g. for filter dam­
age, tightness of the machine and function
of the control devices) by the manufacturer
or an instructed person at least once a
year.
Dispose of components that cannot be
cleaned. Use impermeable bags to do so.
Observe the applicable disposal provisions!
Keep the contacts on the cordless mobile
dust extractor, charger and battery pack
clean.
14.1 Changing the filter bag
► Open the cordless mobile dust extractor
with T-Loc. Attention: Risk of tilting!
► Changing the filter bag:
▷ Remove the filter bag [8].
▷ Insert a filter bag [9].
► Close the cordless mobile dust extractor
with T-Loc.
An additional filter bag can be stored on
the base of the housing [10].
26
Cause
Regular
Volume flow below
20 m/s.
Increasing, begin­
Battery pack charge
ning with two short
low.
Action
Only for dust class M (see sec­
tion 10.3).
– Charge the battery pack.
– Use the newly charged battery
pack.
14.2 Changing the main filter [10]
NOTICE
Damage to the motor
► Never extract material without a main fil­
ter, as this can damage the motor.
► Open the cordless mobile dust extractor
with T-Loc. Attention: Risk of tilting!
► Unlock and fold down lever.
► Remove container upwards.
► Remove the used main filter and replace
with a new one.
► Dispose of the used main filter in accord­
ance with statutory regulations.
► Clean container and seals.
► Insert container. Fold up and lock lever.
► Close the cordless mobile dust extractor
with T-Loc.
Refer to the Festool catalogue for the order
numbers of accessories and tools or find them
online at www.festool.co.uk.

15 Transportation

Observe the following information:
Before transportation, always close the T-
Loc at the cordless mobile dust extractor
or connect to the storage box.
For transportation in vehicles, secure the
cordless mobile dust extractor against slip­
ping and tilting in accordance with the valid
guidelines.

16 Environment

Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
EU only: In accordance with the European Di­
rective on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re­
cycling.

Advertisement

Table of Contents
loading

Table of Contents