IMPORTANT: Lire toutes les instructions avant de démarrer les travaux. Manual de instrucciones Página 30 IMPORTANTE: Lea todas las instrucciones antes de usar. Instruction manual Guide d’utilisation Manual de instrucciones CT 26 E HEPA CT 36 E HEPA CT 48 E HEPA...
Contents Sym- Significance Symbols ..........About this manual........ Wear a dust mask. Safety instructions ....... Tip or advice Technical data ........Functional description ......Handling instruction Intended use ........watt Operation ..........hour Settings ..........minutes Working ..........seconds Filter............. kilograms After finishing work ......
Safety instructions IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basis precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS DUST EXTRACTOR: WARNING - To reduce the risk of fire, electric shock, or injury: – Do not leave the dust extractor when plugged in. Unplug from outlet when not in use and before servicing.
SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS This appliance must be grounded. If it should malfunction or breakdown, grounding pro- vides a path of least resistance for electric current to reduce the risk of electric shock. This dust extractor is equipped with a cord having an equipment-grounding conductor and grounding plug.
Health hazard by dust WARNING! Various dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: •...
[2-3] and the packaging! tions on the machine's name plate. Insert a filter bag in the dust container (see In North America, only Festool machines with chapter "Changing the filter bag"). the voltage specifications 120 V/60 Hz may be used.
Page 8
The switch [1-8] serves as an On/Off switch. It has three positions: Switch position "0" Appliance socket [1-3] is disconnected from the power, mobile dust extractor is switched off. "MAN" switch position Appliance socket [1-3] is disconnected from the power, the mobile dust extractor starts. "Auto"...
Connecting electric power tools air pressure. An IAS adapter (454757) is available to connect Festool pneumatic tools to the IAS system. WARNING The operating pressure of the tool must be 6 bar for the automatic switch-on unit to function correctly.
Extracting dry materials The main filter shall only be used for extracting dry materials. WARNING Before extracting fluids, remove the filter bag (see chapter "Changing the filter bag"). recom- Not suitable to vacuum hazardous or toxic sub- mend using a special wet filter. stances or dusts e.g.
Page 11
ing the filter bag). Make sure that the bolt engages. Place the disposal bag over the edge of the con- tainer. Make sure that the contacts [7-1] are free. Replace the top section [2-1] and close the locking clips [2-2]. Removing the disposal bag [8] Open the locking clips [2-2] and remove the top section of the machine [2-1].
Fold over the lever [9-3] and remove the retain- er [9-2]. Remove the used main filter [9-1] and replace with a new one. Dispose of the used main filter in accordance with statutory regulations. Insert the retainer [9-2] and fold over the lever [9-3] until it engages.
Accessories Use only original Festool accessories and Festool affect the quality of your working results and limit consumable material intended for this machine be- any warranty claims.
Festool accessories and Festool consum- in the Festool catalog or on the Internet under able material! www.festoolusa.com. The accessory and tool order number can be found Disposal Do not throw the tool in your household waste! an environmentally responsible recycling centre.