Service And Maintenance; 10 Environment - Festool CT 15 E HEPA Original Instructions Manual

Mobile dust extractors
Hide thumbs Also See for CT 15 E HEPA:
Table of Contents

Advertisement

English
► Place the mains power cable [4-1] in the
sealable depot. To do so, lay the power ca­
ble through the recess [4-2].
► Disconnect the suction hose [5-1] and fix it
to the mobile dust extractor using the suc­
tion hose attachment [1-3].
► Regularly clean the fill level sensors [7-1]
and check for damage.
► Place the mobile dust extractor in a dry
room inaccessible to unauthorised users.
The lid of the depot also serves as a stor­
age area for tools.
9

Service and maintenance

WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main­
tenance work.
► All maintenance and repair work which re­
quires the motor housing to be opened
should always be carried out by an author­
ised service workshop.
Customer service and repair must only be car­
ried out by the manufacturer or service work­
shops. Find the nearest address at:
www.festool.com/service
EKAT
4
5
3
2
1
Always use original Festool spare parts. Order
no. at: www.festool.com/service

10 Environment

Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
EU only: In accordance with the European Di­
rective on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re­
cycling.
10
Information on REACH:
reach
www.festool.co.uk/

Advertisement

Table of Contents
loading

Table of Contents