Connecting The Fluid System; Electrical Connection - KNF UFK 1.1100 EX Installation Instructions Manual

Installation Instructions UFK 1.1100 Ex
KNF, Inc. UFK1.1100 Ex.docx
9

3.3 Connecting the fluid system

Use suitable means to check the fluid connection for leaks.
For more information regarding dimensions, please refer to the
data sheet.

3.4 Electrical connection

For terminal assignment, output data, and control requirements,
please refer to the data sheet.
Observe the regulatory requirements for electrical installations:
 Overload protection and separating protective devices
 Contact protection and additional insulation
 Ground connections
 Protection against vibrations, tensile stress, and corrosion
Danger of electric shock
If the pump is not installed correctly, there is a risk of electric
shock.
 The electrical installation of the pump must be carried out
by a trained specialist who has relevant credentials.
Fig. 1: 115V Connection
WARNING