Preparing For Dismantling - KNF UFK 1.1100 EX Installation Instructions Manual

14

5.2 Preparing for dismantling

1. Rinse the pump with a suitable neutralizing liquid and make
sure that there are no dangerous substances left in the pump
(see warnings above).
2. Pump the unit empty.
3. Disconnect electrical connections.
4. Remove hoses from pump head.
Tools
Qty Tools
1 Torx screwdriver T30
1 Slotted screwdriver size 0
1 Allen key size 4mm
Table 1
Installation Instructions UFK 1.1100 Ex
KNF Flodos UFK1.1100Ex O&M-Rev2