KNF UFK 1.1100 EX Installation Instructions Manual page 12

12
Danger from hot surfaces
The pump becomes hot during operation. Burns from hot surfaces
or injuries from uncontrolled movements are possible.
 Do not touch the pump while it is operating.
 Ensure a sufficient supply of cool air and keep a safe dis-
tance between the pump and neighboring components.
 Operate the pump in accordance with the technical data.
 If the temperature of the medium is above 50°C, take safety
precautions to prevent burns of fluid components.
Before switching on the pump, verify the following:
 All hoses are attached properly.
 Pump is mechanically fixed in place.
 Specifications of the power supply correspond with the data on
the pump's type plate.
 Pump outlet is not blocked.
 All cables are attached properly.
 Contact protection for electrical connections and moving parts
is installed.
Danger of scalding from hot medium leaks
In the terminal system, check the fluid system for leaks at the
operating temperature of the medium.
Danger from rotating parts
The pump must not be operated with the housing cover open.
Installation Instructions UFK 1.1100 Ex
CAUTION
CAUTION
CAUTION
KNF Flodos UFK1.1100Ex O&M-Rev2