Maintenance; Cleaning - KNF UFK 1.1100 EX Installation Instructions Manual

Installation Instructions UFK 1.1100 Ex
KNF, Inc. UFK1.1100 Ex.docx
13

5 Maintenance

Ask your KNF representative about the availability of spare parts
for this product.
Use only genuine parts from KNF for servicing work.

5.1 Cleaning

Danger due to dangerous substances in the pump
Depending on the medium transferred, chemical burns or poison-
ing is possible.
 If necessary, wear protective equipment, such as safety
gloves.
 Work on the pump or fluid circulation system only after
they have been decontaminated and/or a decontamination
declaration is present.
 Rinse the pump with a neutralizing liquid and then pump it
empty.
Danger from medium spraying in the environment
Due to pressure in the pump and adjacent parts, medium can
spray out if hydraulic parts are manipulated or opened.
 Always depressurize the hydraulic parts of the system be-
fore carrying out any work.
 Disconnect the pump from the power supply and make
sure that it cannot be switched on again inadvertently.
Clean the pump.
Clean and dry the parts with a cloth. Do not use solvents for
cleaning, as they can harm plastic parts.
If compressed air is available, blow out the components.
WARNING
WARNING