Finalise A Disc (Dvd Deck Only) - JVC DR-MH30B Instructions Manual

Filename [DR-MH30EU_10Subsidiary.fm]
DR-MH30EU_00.book Page 77 Thursday, June 3, 2004 11:00 AM

Finalise A Disc (DVD Deck Only)

Finalising DVD-R/RW discs recorded on this unit makes it possible
for the discs to be played back on other DVD players. DVD-RW
discs are finalised in the mode that the discs were formatted,
enabling playback on compatible DVD players.
Title names input in the Library Database Navigation are
registered as title names in the DVD menu. (
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/SAT/DVD switch to DVD.
Load a DVD-R/RW disc to finalise.
ENTER
Before finalising
It is possible to record on a blank space.
It is possible to enter title names. (
It is possible to delete titles. (
It is impossible to overwrite recorded areas of DVD-R discs.
Available recording capacity does not increase even if a recorded title
is deleted from a DVD-R disc.
It is impossible to record or edit DVD-R/RW discs recorded on other
devices even if they have not been finalised.
After finalising (For DVD-R/RW (Video mode) discs)
Video and audio that have been recorded by then are recorded in
conformity to the DVD Video standard, enabling you to play back the
discs as DVD VIDEO discs.
Although DVD-R/RW discs finalised on this unit become playable on
DVD players compatible with DVD-R/RW discs, some discs still may
not play, for which JVC cannot take responsibility.
Marked points marked before finalising will be deleted, and titles will
be divided automatically into "chapters" approximately every 5
minutes. ( pg. 29)
Depending on the DVD players and DVD-R/RW discs used, and on
the conditions of recording, it may not be possible to play back the
discs. In this case, play back the discs on this unit.
Additional recordings become impossible.
Page 77
pg. 52)
CABLE/DBS
TV DVD
rtwe
SET UP
pg. 52)
pg. 53)
Masterpage:Right+
Finalise A DVD-R/RW Disc
1
Perform steps 1 to 3 of "Format A DVD-RAM Disc" (
before continuing.
2
Press rt w e to select "FINALIZE", then press ENTER.
Press w e to select "OK", then press ENTER.
3
Press w e to select "OK", then press ENTER.
4
Press SET UP to return to the normal screen.
Menu screen is cleared.
Once a DVD-R/RW (Video mode) disc has been finalised, the
displays for original and play list do not appear. Only display for
library appears.
Once a DVD-RW (VR mode) disc has been finalised, it can be played
on DVD players compatible with VR mode.
Cancel The Finalisation Of A DVD-RW Disc
1
Load a DVD-RW disc to cancel the disc finalisation, and perform
steps 1 to 3 of "Format A DVD-RAM Disc" (
continuing.
2
Press rt w e to select "CANC. FINALIZ.", then press ENTER.
3
Press w e to select "OK", then press ENTER.
4
Press SET UP to return to the normal screen.
When the disc finalisation is cancelled, the mode in which the disc
was formatted is restored, making the disc recordable. (
SUBSIDIARY SETTINGS
77
EN
pg. 76)
pg. 76) before
pg. 8, 76)
Thursday, 3 June 2004 10:46