JVC DR-MH30B Instructions Manual page 49

Filename [DR-MH30EU_07Timer Recording.fm]
DR-MH30EU_00.book Page 49 Thursday, June 3, 2004 11:00 AM
ENTER
Check Programmes
To check the whole list of programmes
1
Press PROGRAMME to access the programme top screen.
2
Press rt to select "PROGRAM LIST", then press ENTER.
The details of a selected programme appear on the top of the screen.
The daily programme of a title is listed as one programme.
To check the list of programmes by date
1
Press PROGRAMME to access the programme top screen.
2
Press rt to select "CALENDAR LIST", then press ENTER.
3
Press rt to select the desired date, then press ENTER.
Cancel And Change Programmes
Repeat steps in "Check Programmes" to select a programme before
proceeding.
To cancel the programme
1
Press rtw e to select "CANCEL", then press ENTER.
To modify the programme settings
1
Press rtw e to select "MODIFY", then press ENTER.
2
Change the settings of the desired recording options as
required.
Refer to steps 4 – 12 in "Manual Timer Programming" (
To skip the weekly/daily programmes to the next week/day
It is easy to temporarily cancel weekly/daily programmes of a
week/day.
1
Press rtw e to select "PROGRAM SKIP", then press ENTER.
2
Press w e to select "SKIP", then press ENTER twice.
To save the titles of weekly/daily programmes (HDD Deck
Only)
Use this function to avoid overwriting titles of weekly/daily
programmes of a previous week/day.
1
Press rtw e to select "TITLE SAVE", then press ENTER.
2
Press w e to select "SAVE", then press ENTER twice.
NOTE:
This function is available only when the remaining capacity of the hard
disc is sufficient.
Page 49
When Programmes Overlap Each Other
CABLE/DBS
TV DVD
If "PROGRAMME OVERLAPPED" appears, you have other
programmes overlapping the programme you have just made.
Confirm with the arrow on "MODIFY", then press ENTER.
Programme Overlap list appears.
Example: Five programmes
overlap each other.
1
Confirm the overlapping
PROGRAMME
programmes. Overlapping
programmes appear on the TV
screen.
rtwe
NOTE:
If you do not mind this overlap, press
PROGRAMME to finish the timer
programme setting. The programme with the lower programme number
will be recorded and the other one will not be recorded correctly. If no
changes are made for approximately 1 minute, the unit will return to the
normal screen.
2
Press rt to select the desired programme to be cancelled or
changed, then press ENTER.
3
Perform "Cancel And Change Programmes" (
NOTE:
When any overlaps remain after deletion and modification of
programmes, Programme Overlap list remains showing the conflicting
programmes. In such a case, repeat the procedure above until the
conflict is solved.
pg. 48).
Masterpage:Right+
TIMER RECORDING
49
EN
2
PROGRAMME > CALENDAR PROG. (OVERLAP)
01/08/03 WED 22:30 - 24:00 DBS 100
GARDENING [EDUCATION] FR360
5 PROGRAM OVERLAPPED
SELECT PROGRAM TO MODIFY
SELECT WITH [ ]
THEN PRESS [ENTER]
22:30- ADDS
PRESS [PROGRAM]
TO EXIT
D 21:00- L-1
W 21:30- PR. 7
22:00- PR. 10
D
PROGRAM ENTER
23:00- BBC2
EXIT SELECT
pg. 49).
Thursday, 3 June 2004 10:46