Advertisement
Step 23: Attach Swings
WARNING:
63
for bolts protruding beyond T-Nuts. Use
A: Insert flexible Swing Hanger Cover over hook. (fig. 23.1)
extra washers to eliminate this condition.
B: Slide Swing Hanger Cover around hook until at top. (fig. 23.2)
A: Attach 2 Belt Swings and Swing Bar to the Bolt-Thru Swing Hangers. (fig. 1)
C: Hook swing rope onto hook. (fig. 23.3)
B: Insert flexible Swing Hanger Cover (9300000) over hook. (fig. 2)
C: Slide Swing Hanger Cover around hook until at top. (fig. 3)
D: Twist and flex Swing Hanger Cover onto open end of hook. (fig. 23.4)
D: Hook swing rope onto hook. (fig. 4)
E: Twist and flex Swing Hanger Cover onto open end of hook. (fig. 5)
Fig. 2
Fig. 23.1
9300000
europecustomerservice@kidkraft.com
+31 20 305 8620
M-F from 09:00 to 17:30 (GMT+1)
Check entire playset
Fig. 3
Fig. 4
Fig. 23.2
Fig. 23.3
Fig. 1
Fig. 5
Fig. 23.4
x 2 Belt swings
Swing Bar
3724948
Belt Swings
parts.kidkraft.eu
26
77
If Bolt protrudes
beyond T-Nut
Use an extra
Flat Washer
3724910
3724948
Belt Swings
Note: Structure partly
removed for clarity.
Other Parts
1 x
3724910
Other Parts
2 x
3724948
2 x Belt Swing
6 x
9300000
4 x Swing Hanger Cover
Advertisement
