IKEA SMAKSAK Manual page 27

ENGLISH
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
The core temperature sensor
does not operate.
Steam and condensation set‐
tle on the food and in the
cavity of the oven.
The display shows "C2".
The display shows "C3".
The display shows "F102".
Possible cause
The necessary settings are
not set.
The automatic switch-off is
activated.
The Child Lock is on.
The door is not closed cor‐
rectly.
The fuse is blown.
The lamp is defective.
The plug of the core temper‐
ature sensor is not correctly
installed into the socket.
You left the dish in the oven
for too long.
You want to start the Pyroly‐
sis or Defrost function, but
you did not remove the core
temperature sensor plug
from the socket.
The cleaning function does
not operate. You did not fully
close the door, or the door
lock is defective.
• You did not fully close the
door.
• The door lock is defective.
Remedy
Make sure that the settings
are correct.
Refer to "Automatic switch-
off".
Refer to "Using the Child
Lock".
Fully close the door.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again and
again, contact a qualified
electrician.
Replace the lamp.
Put the plug of the core tem‐
perature sensor as far as
possible into the socket.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
Remove the core tempera‐
ture sensor plug from the
socket.
Fully close the door.
• Fully close the door.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows "F102"
again, contact an Author‐
ised Service Centre.
27