Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Erbauer ERB596CSW
Summary of Contents for Erbauer ERB596CSW
- Page 1 ERB596CSW 2000W 235mm CIRCULAR SAW ERB596CSW...
- Page 2 Original Instructions (Version 1.0)
- Page 3 Congratulations on your purchase of a quality power tool from Erbauer (UK) Ltd. This product should give you reliable service but for your peace of mind this power tool does carry a 2 year guarantee, the terms of which are detailed below.
-
Page 4: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS Warning: Read all safety warnings and all instructions. Save all warnings and instructions for future reference. power tool or battery-operated (cordless) power tool. 1. Work area safety a. Keep work area clean and well lit. Cluttered or dark areas invite accidents. - Page 5 Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch 2000W 235mm CIRCULAR SAW ERB596CSW...
- Page 6 c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Page 7 Less than a full tooth of the blade teeth should be visible below the work-piece. d. Never hold piece being cut in your hands or across your leg. Secure the work-piece to a stable platform. It 2000W 235mm CIRCULAR SAW ERB596CSW...
- Page 8 e. Hold power tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. the operator. f. When ripping always use a rip fence or straight edge guide. blade binding. g.
- Page 9 Check the operation of the lower guard spring. If the guard and the spring are not operating properly, they must be serviced before use. 2000W 235mm CIRCULAR SAW ERB596CSW...
- Page 10 c) Lower guard may be retracted manually only for special cuts such as “plunge cuts” and “compound cuts.” Raise lower guard by retracting handle and as soon as blade enters the material, the lower guard must be released. For d) Always observe that the lower guard is covering the blade An unprotected, coasting blade will cause the saw to walk backwards, cutting blade to stop after switch is released.
- Page 11 Typical weighted vibration cutting wood used with the current guidance on vibration. Warning: The use the correct accessory for the tool and ensuring it is sharp and in good condition. The tightness of the grip on the handles. 2000W 235mm CIRCULAR SAW ERB596CSW...
- Page 12 And the tool is being used as intended by its design and these instructions. While working with this power tool, hand/arm vibrations occur. Adopt the correct working practices in order to reduce the exposure to vibration. This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
- Page 13 SYMBOLS Warning Double insulation Wear ear protection Wear eye protection Wear gloves Waste electrical products should not be disposed of with household waste. or retailer for recycling advice. 2000W 235mm CIRCULAR SAW ERB596CSW...
- Page 15 SPINDLE LOCK BUTTON DEPTH OF CUT SCALE DEPTH OF CUT ADJUSTMENT LEVER HEX KEY (See Fig. 1-2) BLADE BOLT (See Fig. 1-2) OUTER FLANGE (See Fig. 1-2) INNER FLANGE (See Fig. 1-2) SPINDLE (See Fig. 1-2) 2000W 235mm CIRCULAR SAW ERB596CSW...
-
Page 16: Technical Data
TECHNICAL DATA Rated voltage Rated power 2000W No-load speed evel capacity Protection class Machine weight NOISE INFORMATION A weighted sound pressure A weighted sound power ACCESSORIES Parallel guide Vacuum adapter (32mm) Hex key (6mm) Blade ( 235mm×2.8mm× 30mm, 36T) Dust tube Screws for dust tube (M4X10mm) 2pcs... -
Page 17: Intended Use
(21) by turning it in a counterclockwise direction. allow the saw blade (11) to be located onto the clockwise direction. Fig. 1-3 WARNING: Saw blade teeth are very sharp. Wear gloves for protection. DUST EXTRACTION OUTLET (See Fig. 2) Fig. 2 2000W 235mm CIRCULAR SAW ERB596CSW... - Page 18 SAFETY ON/OFF SWITCH Your switch is locked off to prevent accidental off switch. HAND GRIP POSITION RIGHT operating. The right and wrong ways to support Fig. 3-1 DEPTH OF CUT ADJUSTMENT (See Fig.4-1, 4-2) the saw body until the blade is at the right depth. your depth of cut so the blade can cut through the WRONG Fig.
- Page 19 Slide the parallel guide Fig. 6 cutting distance and tighten screw to lock into using with a parallel guide (9). For straight cuts, a trial cut to check the setting. 2000W 235mm CIRCULAR SAW ERB596CSW...
-
Page 20: Working Hints For Your Circular Saw
WORKING HINTS FOR YOUR CIRCULAR SAW usage at very low speeds. Always use a blade of blade teeth increases. Always ensure that the quality of the cut. The blade cuts on the upward edges of your work piece. When cutting, ensure MAINTENANCE Remove the plug from the socket before carrying out any adjustment, servicing or... -
Page 21: Plug Replacement
The wire which is coloured blue Warning: Never connect live or neutral wires to the earth BS1363/A plug and the correct rated fuse. Note: engaging into a socket. Connect (neutral) Outer sleeve Cable grip 2000W 235mm CIRCULAR SAW ERB596CSW... - Page 22 DECLARATION OF CONFORMITY Erbauer (UK) Ltd BA22 8RT Declare that the product 2000W 235mm Circular saw ERB596CSW 2006/42/EC 2006/95/EC 2004/108/EC 2011/65/EU 2012/19/EU EN55014-1:2006+A1:2009+A2:2011 EN55014-2:1997/+A1:2001/+A2:2008 EN61000-3-2:2006/+A1:2009/+A2:2009 EN61000-3-3:2008 EN60745-1:2009+A11:2010 EN60745-2-5:2010...
Need help?
Do you have a question about the ERB596CSW and is the answer not in the manual?
Questions and answers