Getting Started - Jensen JCR-275 User Manual

1.
Do not mix old and new batteries.
2.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
3.
If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking
batteries can cause damage to the unit and may void the warranty.
4.
Do not dispose of batteries in fire, batteries may explode or leak.
5.
Replace all the batteries at the same time, no matter exhausted or not, every 2 years at the
same time to avoid possible battery leakage.
Please be sure the outlet you plug this unit into is working and provides uninterrupted power.
1. Insert the plug of the AC power cord into a 120V~ 60Hz outlet.
2. Press the RESET BUTTON (#11) on the bottom of the unit with a pointed object (e.g. a
straighten paper clip) to initialize. After a brief self test, the unit enters the clock mode at
12:00AM.
IMPORTANT
There is a sensor located on top of the unit that picks up any movement or objects near the top or
back of the unit. Please be sure to place the radio on a surface with a no obstructions 9-12 inches
above or 3-6 inches behind the unit. This will help maximize the area for recognizing the motion of
your hand and also reduce the chances of the unit false triggering. If the unit begins beeping and
the display functions erratically, it may be either too close to an object above or behind the unit. If
this happens, please make sure there are 9-12 inches of clearance above and 3-6 inches behind
the unit to avoid the false triggering.
Setting up the Calendar and Clock in normal time or radio mode:

GETTING STARTED

SETTING UP THE CALENDAR AND CLOCK
E-5