Included In The Package; Accessories - EBECO EB-Therm 800 Manual

Included in the package

1. Thermostat
2. Quick guide

Accessories

Depending on how you are going to use your thermostat, you may
need to complement it with some of the parts below.
2.
1.
1. Sensor cable 3 m (High temperature sensor)
You need to use this part if you are going to control temperatures above +75 -150 °C.
2. Sensor cable 6 m (Low temperature sensor)
3. Encapsulated sensor IP20/ IP54
You need to complement with this part if you are using the thermostat as a room
thermostat or in connection with the max/min program for roof installations. It must
be permanently in the shade, e.g. on the north side or a shade side. Ensure that it is
not affected by heat emittance from the building or a heating cable.
4. Roof sensor,
You need to complement with this moisture sensor if you are using the moisture
function in the max/min program for roof installations.
5. Ground sensor,
You need to complement with this sensor if you are using the moisture & tempera-
ture function in the max/min program for ground installations.
E 85 816 10
3.
E 85 816 22
E 89 350 75
E 85 801 01
3. Sensor cable 3 m
4. 5.
E 85 816 73
E 85 816 84
E 85 816 71
4