Download Print this page

Raider RD-EA02 SET User Manual page 14

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11
14
www.raider.bg
• If the auger bit jams,stop the engine immediately.
FEATURES/SPECIFICATIONS
AIRBOX
The airbox cover houses the air filter which helps to limit the amount of dirt and dust drawn into the unit
during operation.
CHOKE LEVER
The choke lever is used when starting the engine.
DRIVESHAFT
The driveshaft is connected to attachments to transfer movement.
ENGINE SWITCH
The engine switch is used in combination with the recoil starter grip to start the engine.It is
also used to turn the engine off.
FUEL TANK
1200ml
GEARBOX
The gearbox transfers the engines RPM to a slower high torque output.
GUDGEON PIN LOCATOR HOLE
The gudgeon pins secure the attachments to the driveshaft via the locator holes.
PRIMER BULB
The primer bulb is used to prime the carburetor prior to cold starting or if the unit
has not been used for a while.
RECOLL STARTER GRIP
The recoll starter grip is used (along with the engine switch)to start the engine.
THROTTLE LOCK
The throttle lock is used to help the engine on cold starts.
THROTTLE TRIGGER
The throttle trigger helps the operator control the speed of the auger to suit various
ground conditions.
TRIGGER LOCK
The trigger lock prevents the operator from accidently activating the throttle trigger.
The trigger lock must be depressed before applying the throttle
FITTING THE AUGER BITS
Align the engine drive shaft into the seat on the auger bit and secure it using the appropriate
gudgeon pin and cotter pin.
WARNING!
Never use the drill with the handles above waist level
Drilling with the units handles above waist level restricts control and can cause
serious chest injuries if a hard object is struck.
WARNING!
Do not change the ratio of the reduction gearbox.The characteristics of the
machine could change and unforeseen reactions could occur.
FUEL AND REFUELING SAFETY
Always handle fuel with care,its highly flammable.
Always refuel outdoors where there are no sparks and flames.Do not inhale fuel vapours.
Do not let petrol and oil come in contact with your skin.
Keep petrol and oil away from the eyes.If petrol or oil comes in contact with eyes,wash them immediately
with clean water.If irration is still present,see a doctor immediately.
Clean up spilled petrol immediately.
MIXING THE FUEL
• This product is powered by a 2-stroke engine and requires pre-mixing of petrol and 2-stroke oil.pre-
mix unleaded petrol and 2-stroke engine oil in a clean container approved for petrol.
• This engine is certified to operate on unleaded petrol intended for automotive use with anoctane rating

Advertisement

loading