Can-Am MAVERICK Trail 2021 Series Operator's Manual page 104

Table of Contents

Advertisement

MAINTENANCE SCHEDULE
EVERY YEAR OR EVERY 3 000 KM (2,000 MI) OR 200 HOURS
EVERY YEAR OR EVERY 1 500 KM (1,000 MI) OR 100 HOURS
Replace gearbox oil (Perform at the first 3000 km and then every 2 years or 6000 km)
Inspect and clean engine air filter. Replace if needed
Inspect steering system for abnormal play and damages (column, rack and pinion,
bellows)
Inspect the tie rod ends and ball joints for play and inspect boots condition
Inspect wheel bearings for abnormal play
Inspect suspension arm bushing and wear plates. Replace if needed. (if equipped )
Tighten rear suspension upper a-arm fasteners
Inspect CV joints and rubber boots condition (check for abnormal play in the joints and
for cuts in the rubber boots)
Lubricate suspension arms and stabilizer bar bushings (front and rear)
Inspect tightening torque of all suspension arm bolts and rear knuckle bolts. Tighten to
specification if needed.
Tighten the shock absorber fasteners to specification every 3000 km (Maverick Sport
models)
Inspect and clean the brake system (fluid level, pads, discs, lines, calipers)
Check front differential oil level and look for contamination and overall condition (vents,
mount bolt torque, seals)
Inspect battery condition and connections
Inspect propeller shaft U-joints for abnormal play.
Clean exhaust pipes and muffler area
Clean muffler spark arrester
Adjust valve clearance
Replace fuel vent breather filter
Inspect CVT drive belt
Inspect and clean CVT pulleys
Inspect centrifugal levers and rollers of drive pulley
Inspect and lubricate drive pulley hub needle bearing
Inspect input and output shaft seals (engine, gearbox, differential)
______________
102
(whichever comes first)
(whichever comes first)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents