Changing The Needle - Janome New Home 580 Manual Of Instruction

CHANGING THE NEEDLE
1. Raise needle to its highest point by turning balance wheel toward you.
2. Loosen needle clamp screw and remove the needle.
A4,
3. Insert new needle, with the flat side of needle to the right, and push it upat
I
0
all the way until it hits pin.
4. Tighten needle clamp screw firmly.
TO CHOOSE CORRECT NEEDLE
The needle should be straight and the point of needle should not be bent
F[t ,dll to t"h
oghl
or blunt. Select a needle of correct size to permit the thread smooth
gNeedle
bar groove
passing.
0
0
x
Select straight needle
Point should not
be bent or blunt
8