Changing The Needle; Fabric And Needle Chart - Janome TS200Q Instruction Book

Table of Contents

Advertisement

q
Fabric
Lawn
Fine
Tricot
Organza
Crepe
Jersey
Broadcloth
Fleece
Denim
Heavy
Tweed
weight
Coating
Quilting
NOTE:
(Part No. 639804000).
w
Thread
Needle

Changing the Needle

CAUTION:
Turn OFF the power switch before changing the
needle.
Raise the needle to its highest position by turning the
handwheel counterclockwise, and lower the presser
foot.
Loosen the needle clamp screw by turning it
counterclockwise. Remove the needle from the needle
clamp.
side to the rear. When inserting the needle into the
needle clamp, push it up as far as it will go.
clockwise.
q Needle clamp screw
w Flat side
should be consistent. Never use a bent or blunt needle.
A damaged needle can cause permanent snags or runs

Fabric and Needle Chart

lightweight fabrics, so the fabric will not be marred.
the fabric without fraying the needle thread.
fabric that will be used for actual sewing.
bobbin.
NOTE:
synthetics, use a blue tip needle (Part No. 990311000,
sold separately). The blue tip needle effectively
prevents skipped stitches.
14

Advertisement

Table of Contents
loading

Table of Contents